Integrated amplifiers



  • TFM-2000 6AS7G A1PP Stereo Pre-Amplifier


  • Remarkable quality and value
  • This integrated amplifier employs transformer type ATT with a large supermalloy winding core for ultimate lossless signal transmission. Transformer-coupled throughout all stages, with fixed bias and class A push-pull circuit, it is characterized by close to no loss of low signal, and improved linearity of frequency response. It guarantees exceptional performance and sound quality that surpasses its competitors.
  • Commonly used resistor-type volume controllers cause significant signal loss that results in poor sound quality and frequency response. By contrast, TFM-2000 adopts an exclusive volume control system that minimizes signal loss, for optimal sound quality.

INPUTS: CD, TUNER, TAPE, AC, AUX
MAXIMUM INPUTS:CD, TUNER, TAPE, AV, AUX (2Vrms)
ATT: Lossless winding transformer type ATT (volume)
OUTPUTS: R-speaker
POWER OUTPUT: 6W x 2
HARMONIC DISTORTION: Below 5% / 6W
FREQUENCY RESPONSE: 20Hz – 20KHz +/- 3dB (each tap)
RESIDUAL NOISE: Below 1,0 mV / 8 ohm
POWER CONSUMPTION: 180 VA
POWER SUPPLY: AC 100V, 50/60 Hz
DIMENSIONS: W 44.5 x H 22.5 x D 25.0 cm
WEIGHT: 24.5 kg



TYPE: Vacuum tube stereo integrated amplifier

2134312_orig


3268349_orig





  • TFM-9412PCS Stereo integrated amplifier


  • A superior integrated amplifier. If you do not espouse the idea of a separate pre-amplifier, this integrated pre-amplifier offers the best value in terms of performance and ease of use. It employs a powerful power supply circuit for excellent signal transmission, and several features that guarantee the same or better performance than a separate pre-amplifier.
  • TFM-9412 features a lossless winding type ATT large supermalloy core transformer throughout all stages, fixed bias and class A push-pull circuit. Loss and frequency characteristics at the low-level signal are refined, and sound is exceptionally faithful to the original. Embodying a combination of the TFA-8902 preamplifier and TM-9402 power amplifier, the TFM-9412 is top quality equipment that represents a great value.


TYPE: Vacuum tube stereo integrated amplifier
INPUTS: CD, TUNER, TAPE, AV, AUX
MAXIMUM INPUTS: CD, TUNER, TAPE, AV, AUX (3Vrms)
ATT: Lossless winding transformer type ATT (volume)
OUTPUTS: REC OUT (on / off switch) speaker terminal
POWER OUTPUT: 8 W x 2
HARMONIC DISTORTION: Below 1% / 6 W
FREQUENCY RESPONSE: 20 Hz – 20 KHz +/- 1 dB (each tap)
RESIDUAL NOISE: Below 1% mV / 8 ohm
POWER CONSUMPTION: 170 VA
POWER SUPPLY: AC 100V, 50/60 Hz
DIMENSIONS: W 44.5 x H 22.5 x D 41.0 cm
WEIGHT: 31.0 kg



Pasted Graphic